Sprøytepistoler
Zargomat pro

PFT ZARGOMAT pro Part no. 00 42 00 58 complete equipped with: Mortar hose 3/4”, 1.5 m – with rotating coupling directly at the glueing pistol – with coupling 25 female part Glueing hose 3/4”, 290 mm with Geka coupling
Accessories required: Extension cable 16m for remote switch Part no. 00088049 Extension cable 25m for remote switch with plug and coupling Part no. 20456931 Extension cable 50m for remote switch with plug and coupling Part no. 20456934 Using the cap for decorative plasters and reinforcing mortar, the whole application –glueing and reinforcing – can be handled even air supported for wdv-systems with only one spraying device, the PFT ZARGOMAT pro. Cap for decorative plaster glueing pistol nozzle Ø 10 mm Part no. 00 01 97 87
Andre + dyser og koblinger

35mm PFT spraying gun
20196000

PFT spraying pistol 25mm, ID24
20190002

PFT spraying pistol long-version, 30°curved, ID24
20190011

PFT spraying gun for texture coats and reinforcement plasters
20195900

PFT spraying gun with crimp valve 25mm, ID24/35mm
20192001/20192700

PFT spraying gun for concrete repair 35mm with nozzle tube 12mm cpl.
20196300

PFT spraying gun for concrete repair 35mm with nozzle tube 15mm cpl.
20196400

PFT spraying gun for concrete primer with spray head
20196700

PFT air manifold complete with nozzle tube
20191800

PFT tuck pointing with nozzle GEKA coupling
20195010

PFT mortar nozzle 180 mm wide and coupling
20195200/20200795

PFT paint gun SWING with sprayhead
00008588

PFT JETSET cpl. with/without remote control cable
00020388 / 00021285
Plastic case with compartments, black
00020998

PFT JETSET bonding gun with pressure switch-off device (basic module), for door frame grouting and bonding of thermal insulation systems
00010468

PFT JETSET texture coat attachment Bonding gun for application of fine finish coats/texture coats with very large quantities of air
00019787

PFT JETSET fine plaster attachment Bonding gun for the application of base/finish coast with little air
00019788

PFT spraying set SWING in case
00008479
Consisting of: *spray gun with air regulation and ball tap *nozzles Ø 4,5 mm/6,5 mm/ 8,5 mm/10,5 mm *cylinder brush *slot nozzle *pin punch *elbow 70°